Inventor Introduction for Experienced CAD Users

Inventor Introduction for Experienced CAD Users Reviews

After three days I am now confident in using Invertor all thanks to our instructor Matt

Scott Davis

My training course instructor Matt did a fantastic job going through the course material in an exciting and fluid motion. He helped answer any questions and then proceeded with the course material.

juris

Course was very flexible and worked around the experience I had on AutoDesk Inventor.

Archie Stanbury

I have really enjoyed this 3-day course. I was given the chance to ask any questions freely. All questions were answered by the instructor very well. I have gained more confidence in the use of Inventor software although I have previous experience of 3D modelling software. Matt has been very helpful and clear.

Ayda Goorangi

Excellent course, very informative.

Carl Fletcher

Course was clear, and well presented. Very friendly and approachable trainer. Will definitely help me to progress with Inventor use at work.

Chris Wilkinson

Excellent course, really enjoyed learning Inventor.

Michael Keen

Excellent all-round practical learning experience.

Paul Twigg

Some skills very basic and would expect slightly more advanced topics considering the course was aimed at already experienced CAD users

Samuel Straccia

Great course, Steve was a great tutor. Will be recommending Quadra/ this course to anyone who needs Autodesk training.

Simon Cowell

Good experience learnt a number of new things with the UI within Inventor that I can now apply in my existing role.

Jack Wild

Very thorough teaching of the software. Very well tailored to individuals who have prior CAD experience.

James Croucher

Books and course teacher are great, would recommend

Dan Goodheart

Very informative and personable instructor.

Adham Mahmood

Matt was a great trainer.

Chris Thurman

VERY ENJOYABLE THREE DAYS

simon throup

The course went over a lot of info that I already knew but also taught me ways to work that will improve my workflow.

Zack Wallwork

With all delegates on the course coming from the same company and with similar background of previous CAD packages, we had many questions along the lines of "we do this X way in Y software, what would the equivalent be in Inventor?" even though these could interrupt the flow of the session Matt was happy to take the tangent to answer them or save them for later. The 3 day course answered many of the frustrations i have experienced in two months of using Inventor with no training, and where there wasn't a direct function that did the same, a work around was found. Matt was also happy to show us things relative to our business that were not technically covered by the course.

Anonymous

Good training, lots of knowledge given out and useful tips & tricks.

James

Great level of course for beginners & users with a basic knowledge.

Brian

Good course that touches on each part of inventor to give you a good introduction on how to use it.

Ryan Holmes

Very well structured course and easy to follow even for someone who is a beginner to CAD as a whole, the lecturer seemed very knowledgeable of the subject.

Anonymous

Very informative course. Was clearly delivered by Matt and the training was very helpful for my further development.

James Hinkley

Course was brilliant, covered all the basics and really helped me out as someone who has been self taught for 3 years to learn how to use some of the features properly, only wished I'd been on this as soon I started using Inventor as there were many features that had I known how to use them, would have been helpful in my short time using the software!

James Armstrong-Flemming

Very good and informative course. Presented in very manageable parts through the 4 days considering the amount of information being given. Enjoyed the 'hands on' and how the training room was set up to see the training in great detail.

Andy Leecy

Well presented. A lot of information to digest/retain. Training manuals had to be purchased at the end of the course. As Westinghouse have not purchased these, it is going to be difficult for me to remember the course content.

paul burton

Really enjoyed the course! The training was correct for what I needed and if I needed any support on certain topics, Matt was great at helping support. The facilities were great too.

John C

Excellent course

Anonymous

This course was great for transferring my CAD knowledge directly to Inventor. My tutor Stephen provided the course in a way that kept me fully engaged. He also answered all of my questions which was much appreciated.

Dean Catterall

Enjoyed my 3 day course with Matt. Learnt a lot during my time here.

Anonymous

I enjoyed the course, and learned a lot.

Anonymous

Engaging course. Instructor was knowledgeable and friendly.

Dan Bell

Training was well paced and easy to understand. Matt regularly checked in to make sure we understood everything. I definitely feel more confident using Inventor following this training.

Anonymous

Matt made this course really enjoyable! He is very knowledgeable of Inventor and answered all questions I had. If I need anymore Inventor training I will definitely be coming back.

Anonymous

A well-paced and well-structured course that contained lots of very useful information that I will be very helpful for my day job. Matt, our trainer was very knowledgeable and was able to answer most of the questions that group asked. It seemed like we were doing the same exercises twice: once watching the trainer doing the exercise and explaining the process, and once completing the exercise on our own. This made the course a little repetitive at times.

Andrew Gaskell

Matt was really helpful and knowledgeable

Lachlan Carr

After three days I am now confident in using Invertor all thanks to our instructor Matt

Scott Davis

My training course instructor Matt did a fantastic job going through the course material in an exciting and fluid motion. He helped answer any questions and then proceeded with the course material.

juris

Course was very flexible and worked around the experience I had on AutoDesk Inventor.

Archie Stanbury

I have really enjoyed this 3-day course. I was given the chance to ask any questions freely. All questions were answered by the instructor very well. I have gained more confidence in the use of Inventor software although I have previous experience of 3D modelling software. Matt has been very helpful and clear.

Ayda Goorangi

Excellent course, very informative.

Carl Fletcher

Course was clear, and well presented. Very friendly and approachable trainer. Will definitely help me to progress with Inventor use at work.

Chris Wilkinson

Excellent course, really enjoyed learning Inventor.

Michael Keen

Excellent all-round practical learning experience.

Paul Twigg

Some skills very basic and would expect slightly more advanced topics considering the course was aimed at already experienced CAD users

Samuel Straccia

Great course, Steve was a great tutor. Will be recommending Quadra/ this course to anyone who needs Autodesk training.

Simon Cowell

Good experience learnt a number of new things with the UI within Inventor that I can now apply in my existing role.

Jack Wild

Very thorough teaching of the software. Very well tailored to individuals who have prior CAD experience.

James Croucher

Books and course teacher are great, would recommend

Dan Goodheart

Very informative and personable instructor.

Adham Mahmood

Matt was a great trainer.

Chris Thurman

VERY ENJOYABLE THREE DAYS

simon throup

The course went over a lot of info that I already knew but also taught me ways to work that will improve my workflow.

Zack Wallwork

With all delegates on the course coming from the same company and with similar background of previous CAD packages, we had many questions along the lines of "we do this X way in Y software, what would the equivalent be in Inventor?" even though these could interrupt the flow of the session Matt was happy to take the tangent to answer them or save them for later. The 3 day course answered many of the frustrations i have experienced in two months of using Inventor with no training, and where there wasn't a direct function that did the same, a work around was found. Matt was also happy to show us things relative to our business that were not technically covered by the course.

Anonymous

Good training, lots of knowledge given out and useful tips & tricks.

James

Great level of course for beginners & users with a basic knowledge.

Brian

Good course that touches on each part of inventor to give you a good introduction on how to use it.

Ryan Holmes

Very well structured course and easy to follow even for someone who is a beginner to CAD as a whole, the lecturer seemed very knowledgeable of the subject.

Anonymous

Very informative course. Was clearly delivered by Matt and the training was very helpful for my further development.

James Hinkley

Course was brilliant, covered all the basics and really helped me out as someone who has been self taught for 3 years to learn how to use some of the features properly, only wished I'd been on this as soon I started using Inventor as there were many features that had I known how to use them, would have been helpful in my short time using the software!

James Armstrong-Flemming

Very good and informative course. Presented in very manageable parts through the 4 days considering the amount of information being given. Enjoyed the 'hands on' and how the training room was set up to see the training in great detail.

Andy Leecy

Well presented. A lot of information to digest/retain. Training manuals had to be purchased at the end of the course. As Westinghouse have not purchased these, it is going to be difficult for me to remember the course content.

paul burton

Really enjoyed the course! The training was correct for what I needed and if I needed any support on certain topics, Matt was great at helping support. The facilities were great too.

John C

Excellent course

Anonymous

This course was great for transferring my CAD knowledge directly to Inventor. My tutor Stephen provided the course in a way that kept me fully engaged. He also answered all of my questions which was much appreciated.

Dean Catterall

Enjoyed my 3 day course with Matt. Learnt a lot during my time here.

Anonymous

I enjoyed the course, and learned a lot.

Anonymous

Engaging course. Instructor was knowledgeable and friendly.

Dan Bell

Training was well paced and easy to understand. Matt regularly checked in to make sure we understood everything. I definitely feel more confident using Inventor following this training.

Anonymous

Matt made this course really enjoyable! He is very knowledgeable of Inventor and answered all questions I had. If I need anymore Inventor training I will definitely be coming back.

Anonymous

A well-paced and well-structured course that contained lots of very useful information that I will be very helpful for my day job. Matt, our trainer was very knowledgeable and was able to answer most of the questions that group asked. It seemed like we were doing the same exercises twice: once watching the trainer doing the exercise and explaining the process, and once completing the exercise on our own. This made the course a little repetitive at times.

Andrew Gaskell

Matt was really helpful and knowledgeable

Lachlan Carr

After three days I am now confident in using Invertor all thanks to our instructor Matt

Scott Davis

My training course instructor Matt did a fantastic job going through the course material in an exciting and fluid motion. He helped answer any questions and then proceeded with the course material.

juris